 |
This picture shows the
mounting brackets for the hatch. I had to remove about 1.5" of the
sides to accommodate the switch harnesses. |
 |
This picture shows the front
of the hatch. I had to remove the lower section to accommodate the
triangle stock that I had glued behind F1 to hold the engine box top
plate. The 4 holes are recess holes to accommodate the 4-40 bolt
heads that hold the cowl in place. |
 |
The Goebel instrument panel. |
 |
Mr. 3D Pilot Guy sitting in
the recessed area I made in the hatch. This picture is pre-bumping
his microphone boom out of place.... |
 |
Another view of "Mr.
Intensity". Looks kinda like me in my younger days (about 100 years
ago). |
 |
The canopy "dry-fitted".
I think the pilot bust proportions look ok. |
 |
Everything taped in place
while the Wellbond dries. Amazing how quickly it dries while you are
trying to position the canopy, and how slow it dries while you are waiting
for the excess that squeezed out in the canopy to turn clear to see if it
looks disastrous..... |
 |
The mounted canopy. A
strip of Ultracote to seal it to the hatch and we will be through with
this task. |