 |
This picture shows the
mounting formers that are glued into the cowl. The bottom former is
1/4" light ply and the top is a combination of 1/8" light ply and 1/8"
balsa. |
 |
A close-up view of the
mounting former. |
 |
The front view of the finished
product. Nice and clean and no bolts. |
 |
Another view. |
 |
This view shows the four 4-40
bolts that are used to hold the cowl in place. |
 |
The decals supplied by Desert
Aircraft. Very nice quality. |