 |
The ignition system installed
with the spark plug wires padded to prevent chafing. |
 |
The ignition wrapped in heavy
duty foil to help cut down on interference. I mounted the ignition
on 3 pieces of 1/8" rubber to help cut down on vibration. |
 |
I used a JR Heavy Duty
integrated switch and charging jack. I cut the leads from the switch
as short as possible and them soldered. The battery will fit in the
compartment next to the switch. I am using a 5-cell 1400mah pack. |
 |
The ignition system provided
with the DA 100 is very high quality. Nicely shielded all around. |