 |
The Nyrod throttle linkage.
The stops were glued to the box using aliphatic glue. I will harden
them with thin CA glue. |
 |
The servo mounted upside down
in the fuselage platform. This view is inverted and actually shows
the bottom of the fuselage platform. |
 |
Another inverted view showing
the finished throttle linkage. Note the nice straight line of sight
to the throttle arm. |
 |
This is the view of the
fuselage platform between F1 and F2. The Hitec HS-225BB Mighty Mini
servo is mounted upside down in the servo cutout hole. The HS-225BB
has a speed of 0.11 sec/60 degrees at 6V with a torque of 65.8 oz-in. |