 |
One of the wheel pants.
Very good fiberglass and an EXCELLENT paint job. The light spots are
reflections from the overhead lights, not a flaw in the paint. |
 |
The light plywood backer.
There are one of these on each side of both wheel pants. |
 |
A before (right) and after
(left) shot of the wheel pants after one of the openings has been expanded
to accommodate the Kavan wheels. |
 |
A before (left) and after
(right) showing how the axle hub has been shortened to center the wheel.
Don't cut of too much or you will be using washers to center the wheel! |
 |
A view of the finished
product. If you look closely you can see the set screw for the SIG
wheel pant mount. |
 |
And the finished product.
The smudges you see are from handling the wheel pant. I just didn't
do a very good job of cleaning them before shooting this pic. The
paint job is flawless! Good job Aeroworks! |